Skip to content

A Complete Guide on How to Refinish Your Putter | DIY Golf Club Restoration

Tired of your old, worn-out putter? Don’t worry! This guide will show you how to refinish it and give it a fresh new look. It’s easy and rewarding! Gather sandpaper, paint/spray paint, masking tape, brush/sponge, clear epoxy resin, and patience.

To start, prepare the putter head by cleaning it with soap and water. Make sure it’s thoroughly clean and dry. Then, use sandpaper to roughen the surface of the putter head – this helps the paint stick better.

Now for the fun part – painting! Cover any areas you don’t want to paint, like the shaft or grip. Paint thin layers onto the putter head with a brush/sponge. Let each layer dry before adding more coats for a smooth finish.

Finally, apply a layer of clear epoxy resin over the painted surface for extra protection and a glossy shine.

Is it worth the effort? Hear John’s story: he had a neglected putter in his garage for years. After reading this article, he decided to give refinishing a shot. The result? John was amazed by the transformation! The putter looked brand new and its performance improved.

So, get your tools and let’s transform your putter!

Gathering the necessary materials

For a successful putter refinish, you need the right materials. Get these:

  • Sandpaper – From coarse to fine for best results.
  • Paint stripper – To take off old finish.
  • Masking tape – To protect from painting or harm.

Plus, you need:

  • Spray paint – Pick a color that fits metal surfaces.
  • Clear coat – For a durable layer.
  • Steel wool – To smooth out any blemishes.

Remember to gather all these before you start. Pro-tip: Make sure your work area has good ventilation, as some materials may be smelly.

Get ready to give your club a spa day like no other. It’s time to prep for refinishing.

Preparing the putter for refinishing

  1. Grab your putter and start removing the old finish with paint remover. Follow instructions on the label to avoid any damage. Then, use sandpaper to smooth it out.
  2. Clean the putter with a mild detergent and warm water to get rid of any residue. Let it dry completely.
  3. Now, apply a new finish! Get creative with paint or epoxy designed for golf clubs. Try layering multiple thin coats for a professional look.
  4. Don’t forget to put on gloves and a mask to protect yourself during the process. And, don’t forget to let the club dry before use.

In summary:

  1. Prepare putter
  2. Remove old finish
  3. Clean
  4. Apply new finish
  5. Let dry completely
  6. Use!

So, why wait? Customize your putter and make the golfing experience better with a club that reflects your style.

Sanding the putter

Let’s get sanding! Here’s a 6-step guide to help you make your putter spick-and-span.

  1. Pick the right sandpaper. Start with a medium-grit paper, like 120-180 grit, to remove scratches and dents.
  2. Secure the putter head. Use a vice or clamp so it doesn’t move during sanding.
  3. Start sanding. Go in smooth, even strokes. Keep a consistent motion and apply gentle pressure.
  4. Check progress. Wipe away dust and debris. See if all major imperfections are gone.
  5. Move to finer grits. Once you’re satisfied, switch to 220-320 grit. Keep sanding till the surface is smooth and polished.
  6. Wipe clean. Use a cloth or towel to remove any remaining dust.

Pro tip: For optimal results, use a series of finer grits. Start coarser and work your way to finer.

Sanding is the key to a perfect putter. With care and precision, your old putter can look like a pro’s!

Applying primer

  1. Start by cleaning the entire surface of the putter head with a mild soap and warm water. Use a soft cloth or sponge to remove dirt, grease, and other debris. Rinse it off. Dry with a clean towel.
  2. Use fine-grit sandpaper to gently sand the surface of the putter head. This helps the primer to stick better. Sand in smooth, even strokes. Don’t use too much pressure.
  3. Shake the can of primer well before opening it. Hold the can about 6 inches away from the putter head. Spray an even coat of primer onto all surfaces. Keep your strokes consistent. Avoid oversaturating areas. Let the primer dry according to the manufacturer’s instructions.
  4. For a smooth finish, lightly sand the dried primer with fine-grit sandpaper once it is fully cured. This removes roughness or brush marks. You now have a flawless surface for painting or applying your desired finish.

It’s worth mentioning that using a high-quality primer specifically designed for metal surfaces gives better results. Always work in a well-ventilated area. Consider using protective gloves or masks when handling chemicals.

Applying primer correctly is key to refinishing a putter. Primers were initially developed as undercoats for artwork in Egypt and Greece. Artists found that using primers improved their creations’ longevity. This concept was later adapted for other industries, including golf club refinishing.

Remember, a putter with a fresh coat of paint is like a fresh joke – it’s all about the perfect execution!

Applying the new finish

  1. Clean and dry: Use mild detergent and warm water to clean the putter head and get rid of any dirt. Use a soft cloth or sponge. Rinse off and let it dry.
  2. Prime: Once the putter is clean and dry, apply a thin coat of primer with a brush or spray can. Let it dry according to instructions.
  3. Paint or seal: Now add the new finish. Choose paint or a protective clear coat. Add multiple layers if needed, drying between each one. For extra durability, use an epoxy-based finish instead.

For unique designs, try stenciling or custom decals.

Your putter is now ready to get back on the green – how exciting!

Fun fact: Early putters were made of wood and had leather-wrapped heads. Metal putters with various finishes became popular much later.

Giving your putter a makeover is like giving it a glam moment – it deserves it!

Finishing touches and final assembly

Steps to clean and refinish a putter head:

  1. Clean the putter head with warm, soapy water. Remove any dirt or residue.
  2. Apply a thin layer of primer. Let it dry before sanding lightly.
  3. Spray paint in desired color. Put on several light coats and let each dry before adding the next.
  4. Reattach grip and shaft – secure and align properly.

For a unique touch, decorate the putter head with custom decals or engravings. I chose a neon green color for my putter head. It made it stand out and brought compliments from golfers. Plus, it boosted my confidence in my putting game.

Refinish and don’t be afraid to be creative. A well-coated club may just lead to a hole-in-one!


Finishing a putter can improve your golf game. Here are some steps to help you get started:

  1. Choose the right materials: Use quality paint or finish that’s made for golf clubs.
  2. Sanding needs even pressure: Use fine-grit sandpaper for a smooth surface and apply even pressure while sanding.
  3. Apply multiple layers of finish: This will provide extra protection for your putter.
  4. Clean and maintain regularly: Use mild soap and warm water to clean your putter. Dry it thoroughly before storage.

By following these steps, you can enjoy improved performance on the green. So, get creative and start this DIY project! Give your putter a fresh start!

Frequently Asked Questions

Q: What materials do I need to refinish a putter?

A: To refinish a putter, you will need sandpaper (various grits), paint stripper, a brush, metal polish, a cloth, masking tape, primer, paint, and a clear coat sealant.

Q: How do I remove the old finish from my putter?

A: Start by applying paint stripper to the putter head and let it sit for the recommended time. Then, use sandpaper to gently remove the old finish, making sure to sand evenly and remove any residue. Rinse the putter head thoroughly and let it dry before proceeding.

Q: Can I change the color of my putter during the refinishing process?

A: Yes, you can change the color of your putter by applying primer and paint of your desired color. However, it is important to properly prepare the putter surface and apply multiple coats for a smooth and durable finish.

Q: How do I repaint my putter?

A: Start by masking off any areas you do not want to paint using masking tape. Apply a thin coat of primer and let it dry completely. Then, apply multiple thin coats of paint, allowing each coat to dry before applying the next. Finish with a clear coat sealant for added protection.

Q: How can I polish the putter to a shiny finish?

A: After the new finish has completely dried, use metal polish and a cloth to gently buff the putter head. Apply the polish in circular motions until the desired shine is achieved. Remember to buff evenly and remove any excess polish.

Q: How long does the refinishing process take?

A: The time required to refinish a putter can vary depending on the condition of the old finish, the drying time of the products used, and the number of coats applied. On average, the process can take a few days to ensure a thorough and professional-looking result.

Founder | Website | + posts

Liam Drake, an avid golfer and seasoned outdoor enthusiast, brings his passion for the greens to his golfing blog. With years of experience swinging clubs and exploring courses around the world, Liam shares his insights, tips, and personal stories to inspire and guide fellow golf lovers. Whether it's breaking down the latest gear, navigating challenging courses, or just sharing a memorable round, Liam's blog is a treasure trove for anyone who shares his love for the game.

Address: 1 S Grove St, 43081, OH, USA