Table of Contents
Gripping a putter may seem simple, but it needs precision to achieve success on the golf course. This article will guide you through the process with skill.
Start by taking off the old grip. Cut it or use a solvent to loosen the hold. Then, clean the shaft to remove adhesive residue and dirt that may mess up the new grip installation.
Choose a new grip that fits your play style and preferences. A variety of materials and designs are available. Make sure it’s comfy and has the traction you need.
Before continuing, apply double-sided grip tape to the shaft. This will provide extra security and make the surface smoother for the grip.
Align one end of the new grip with the top of the shaft. Slowly slide it on while applying gentle pressure. Ensure alignment throughout to avoid twists.
After installing the grip, let it rest for a few hours before using it. This will help the grip bond to the shaft for a secure hold during swings.
Golf Digest’s experts say having the right grip on your putter can greatly improve your game by giving you better control and feel. So, get ready to grip the putter like it matters, because it does!
Step 1: Gather the necessary tools
Gather the tools you need to install a putter grip! Make sure you have everything required to ensure a smooth process. These tools include:
- a putter grip
- double-sided grip tape
- solvent or grip spray
- a razor blade or utility knife
You may also find it beneficial to use an appropriate-sized shaft clamp for added stability.
Now that you have your tools, let’s get started! Follow our step-by-step guide and you will be able to confidently install your new putter grip. Unlock better control and accuracy with your putt – gather your tools and join us for this exciting journey!
Time to give your old grip the retirement it deserves – we’ve got a killer playlist of golf ball anthems and a miniature putter-shaped cake ready to go!
Step 2: Remove the old grip (if applicable)
It’s essential to take the old grip off before putting on a new one. Here’s a guide to help:
- Secure the putter in a stable position. Use a vise or get someone to hold it for you.
- Locate the end of the old grip and peel it back carefully. Don’t rush, to avoid tearing it.
- Slide it off the shaft when done. Be careful not to make a mess of adhesive.
Take care and be patient when removing the old grip. It’s important to do it properly for a clean, firm foundation for the new one. Let’s give your putter a fresh look and feel! Get the putter shaft ready – no limp grip on the green.
Step 3: Prepare the putter shaft
Gripping your putter just right is key. Don’t miss out on these crucial steps to get the job done:
- Remove the old grip: Use a utility knife or grip tape removal solvent to peel off the old grip.
- Clean and dry the shaft: Wipe the shaft with a clean cloth or towel to remove dirt, debris, and residue. Make sure it’s completely dry.
- Apply double-sided grip tape: Wrap it around the putter shaft, starting from the bottom and working your way up. Overlap each layer slightly.
- Trim excess tape: Use a sharp utility knife or scissors to trim off any excess tape.
- Activate adhesive: Apply solvent or mineral spirits to a clean cloth/paper towel. Wipe down the tape with this solution.
Your shaft is now ready for the new grip! Time to hit the green!
Step 4: Apply grip tape
Putter grips need to be applied properly. Here’s how:
- Prep the surface: Clean the shaft of your putter with rubbing alcohol or similar cleaning agent. This will remove dirt or residue.
- Measure and cut tape: Take grip tape and measure enough for the length of your putter shaft. Cut it with scissors.
- Apply tape: Peel off one end of tape and firmly press it onto shaft from top to bottom. No wrinkles or bubbles.
- Use double-sided tape for extra adhesion.
- Stretch tape slightly before applying.
- Smooth out any wrinkles or bubbles after applying.
Follow these suggestions for a secure fit during golf swings. Go ahead and try it!
Step 5: Install the new grip
Installing a new putter grip can get you one step closer to the perfect putting setup. Here’s how:
- Prep the grip: Remove any old residue or grip tape from the shaft of your putter. Clean it with a solvent for a clean, dry surface.
- Apply grip tape: Cut a strip of double-sided tape longer than the length of your new putter grip. Wrap it around the shaft, covering the entire area the new grip will be placed.
- Install the new grip: Put a little bit of grip solvent inside the open end of the putter grip and on the exposed part of the shaft. Slide the grip over the shaft, aligning it with any alignment markings. Push it firmly onto the shaft until fully seated.
Remember: Let the grip dry completely before using your putter to avoid slipping or movement.
Putting grips have come a long way since William Taylor invented rubber grips in 1894. Different materials and designs have been introduced, so every golfer can find one that suits their needs and style. Installing a putter grip is a skill all golfers should master for optimal performance on the green.
This article is a guide to putting on a putter grip. Here’s the scoop:
- Select a grip size that suits you and your style of play. Too small or large a grip can affect your putting.
- Clean the shaft before putting on the new grip. This helps it to stick better.
- Apply grip tape or solvent to the shaft. This makes the grip easier to install.
- Securely fix the grip onto the shaft. Align it with any reference lines or logos.
Note that these steps cover the basics – other grips or personal preferences may require additional tips.
Putter grips have been around since ancient times. Leather strips/cords were used for better control. With time, better materials and designs have emerged. Technology keeps bringing new options to help golfers get better results on the green.
Frequently Asked Questions
FAQ for How to Put on a Putter Grip
1. What tools do I need to put on a putter grip?
You will need a putter grip, grip tape, grip solvent, a vice or clamp, and a hook blade knife to put on a putter grip.
2. How do I remove the old grip?
To remove the old grip, use a hook blade knife to cut it off, making sure not to damage the shaft. Once the grip is cut, peel it off the shaft.
3. How do I apply grip tape?
First, wrap double-sided grip tape around the shaft, leaving a bit of tape hanging over the end. Remove the backing from the tape and apply grip solvent to the tape.
4. How do I install the new putter grip?
Apply grip solvent inside the new putter grip. Then, slide the grip onto the shaft, align it as desired, and push it onto the tape until it is snug.
5. How long does it take for the grip to bond?
After installing the new putter grip, allow it to dry for at least 24 hours before using it. This ensures that the grip and tape bond properly.
6. Can I put on a putter grip without a vice or clamp?
While using a vice or clamp is recommended for a secure grip installation, it is possible to do it without one. You can ask a friend to hold the club steady while you install the grip.
Liam Drake, an avid golfer and seasoned outdoor enthusiast, brings his passion for the greens to his golfing blog. With years of experience swinging clubs and exploring courses around the world, Liam shares his insights, tips, and personal stories to inspire and guide fellow golf lovers. Whether it's breaking down the latest gear, navigating challenging courses, or just sharing a memorable round, Liam's blog is a treasure trove for anyone who shares his love for the game.
Address: 1 S Grove St, 43081, OH, USA