Sick of missing those important putts on the golf course? Worry no more! Here, we’ll show you how to install a Super Stroke putter grip. This unique grip boosts your putting performance and gives you more control. Ready to start? Let’s go!
There’re plenty of putter grips on the market, but the Super Stroke stands out. It’s designed with advanced technology and engineering, providing golfers with solid stability and a firm feel.
Installing a Super Stroke putter grip can seem tricky. But don’t fear! We’ve made it easy: Gather double-sided grip tape, gripping solvent, a vise clamp, and a sharp knife. These tools will make sure the process goes smoothly.
- First, use the knife to cut off the old grip from the shaft. Then clean the shaft to prepare for the new grip.
- Now for the fun part – applying the double-sided grip tape. Wrap it around the shaft evenly. Make sure there aren’t any gaps or overlaps.
- Time to activate the tape with gripping solvent. Put a generous amount of solvent on each side and spread it evenly. This’ll make sure the new grip adheres well and no air bubbles form.
- The next step is crucial – aligning and sliding on the new grip. Align the flat side and slide it onto the shaft. Push it all the way down with even pressure.
That’s it! You’ve installed your Super Stroke putter grip. Now it’s time to take it for a spin and experience the difference.
Jack had been having putt issues for months. He tried multiple grips, but none gave him stability or control. Then he tried the Super Stroke putter grip. Installing it made an immediate difference. Jack went from missing putts to sinking them. He even won his local golf tournament!
Why wait? Upgrade your grip and unlock your true power on the greens with a Super Stroke putter grip. Say goodbye to missed putts and hello to better performance! Gather your materials and get ready to grip it and rip it – just make sure you don’t strangle yourself in the process.
Materials Needed
To install a Super Stroke putter grip, you need the following:
- The grip itself. Choose one that suits your preferences and style.
- Grip tape. High-quality tape for strong adhesion.
- Solvent or grip solvent. To lubricate the tape and activate the adhesive.
- Rubber vise clamp or vice. For stability during installation.
For a successful installation:
- Prepping the club. Remove any old grips and clean the shaft.
- Applying grip tape. Start just below where your hands should be.
- Activating adhesive. Put solvent inside the open end of the new grip and slide it onto the shaft.
- Securing with vise clamp. Keep the shaft level and allow time for drying before removing the clamp.
And there you have it! Properly installed Super Stroke putter grip means improved control and performance. Don’t be scared, taking off the old putter grip is like ending a bad relationship, just with fewer tears and more solvent.
Step 1: Remove the old putter grip
Want to install a Super Stroke putter grip? Here’s how!
- Cut the old grip near the butt end with a utility knife or razor blade.
- Peel the grip off, starting from the incision.
- Wipe off adhesive with mineral spirits or rubbing alcohol.
- Check shaft for damage or rust.
- Let shaft dry completely.
Beware, if it’s been on there for a while, removal can be tricky.
Plus, Super Stroke grips are a hit among PGA golfers for their innovation and performance. Get ready to revamp your putter!
Step 2: Prepare the putter shaft
It’s time to install that Super Stroke putter grip! Follow these steps for a successful installation:
- Peel off old grip – use a grip remover or utility knife, then discard it properly.
- Clean and dry – use warm soapy water and a cloth to remove dirt and residue. Make sure it’s completely dry.
- Wrap grip tape – start at the top of the shaft and spiral the double-sided tape around evenly, without any gaps or wrinkles.
That’s it! Your putter shaft is now ready for the Super Stroke putter grip.
Pro Tip: Spray some grip solvent on both sides of the grip tape for enhanced adhesion. Don’t miss out – start gripping and ripping with the Super Stroke putter grip today!
Step 3: Preparing the Super Stroke putter grip
To fit a Super Stroke putter grip properly, prepare it first. This gives a snug, smooth fit for top-notch green performance. Here’s a 6-step guide:
- Remove any existing grip. Use a utility knife or grip tape remover – but be careful not to damage the shaft.
- Clean the shaft. Wipe off any dirt, oil or residue with a cloth or towel. This helps the new grip stick better.
- Apply double-sided grip tape. Cut a piece that fits your putter’s shaft. Wrap it around, making sure there are no gaps or wrinkles.
- Activate adhesive. Use a solvent-based activator spray designed for golf grips. Lightly spray it evenly onto the tape.
- Slide on the Super Stroke putter grip. Align the hole at the bottom with the end of your shaft. Push gently until it’s snug against the putter head.
- Check alignment and adjust if needed. Ensure the grip is aligned with your putter head and comfortable in your hands. Make minor adjustments if needed.
Following these steps precisely will give you a solid connection between your hand and clubhead with each stroke. To improve your experience installing the grip:
- Use masking tape instead of double-sided grip tape if you want an easier grip removal in the future.
- Use a vice or grip clamp to hold your putter during installation. It’ll give stability and accuracy when sliding on the grip.
By following these tips, you’ll get a snug, reliable connection with your Super Stroke putter grip and top-notch putting performance. Pouring on the grip solvent? It’s like giving your putter a slippery makeover – just don’t let it get too comfortable!
Step 4: Apply grip solvent
Grip solvent is a must for installing a Super Stroke putter grip. It lubricates and helps the grip fit onto the shaft. Follow these steps:
- Get ready: Remove any existing grip and clean the shaft.
- Apply solvent: Pour some into the new grip and rotate it for even distribution.
- Slide it on: Line up the hole and twist to get to the right spot.
- Activate adhesive tape: If included, press along its length to bond grip and shaft.
- Let it dry: Give ample time for the adhesive and solvent to dry.
Each step is important for optimal performance. For tough installations, use air pressure between grip and shaft. Now, transform your golf game with a Super Stroke!
Step 5: Slide the putter grip onto the shaft
Slide on the putter grip with ease! Follow these steps:
- Take off any existing grip from the shaft.
- Put some grip solvent on the inside of the grip and the shaft.
- Line up the grip with the putter face and slide it on.
- Use a twisting motion to spread the solvent and get the grip in place.
- Align the grip after it’s on, let it dry for 24 hours.
Take your time – this ensures a secure fit and great performance during your game. For extra stability and custom feel, double-sided tape can be used alongside the grip solvent.
Jack had been struggling with his putting until he tried the super stroke putter grip. It made all the difference – his accuracy and control were much better. He never looked back! So why not try it? It could revolutionize your putting game!
Step 6: Align the grip properly
Aligning the grip of a Super Stroke putter is essential. To get optimal performance and comfort, follow these three steps:
- Position the grip. Place the grip in your desired spot, and make sure it feels comfortable and allows for natural motion.
- Align the logo. Check that the Super Stroke logo is parallel to the face of the putter or pointing toward your target line. This helps with consistent alignment.
- Secure the grip. Once you are happy with the position and alignment, use double-sided tape or adhesive to attach the grip. Make sure it is firmly secured and won’t move during use.
It’s important to note that each golfer may have different preferences when aligning their putter grip. Test different positions and alignments until you find what works best for you.
A golfer once shared his struggles with misaligning the Super Stroke putter grip. After properly aligning it, his putting improved dramatically, resulting in better scores and more confidence on the course.
Remember, a properly aligned Super Stroke putter grip can make a substantial difference in your putting performance. Take the time to follow these steps and find what works for you, and watch as your putting game takes off!
Step 7: Allow the grip to dry and set
Make sure to leave your grip to dry and set. To do this:
- Get rid of any extra solvent or glue using a clean cloth or paper towel.
- Put the club in a secure, airy spot and don’t touch it for 24-48 hours.
- Avoid moving the grip during that time so it can dry and set effectively.
It’s essential to make sure the grip dries and sets totally before using it. That way, it will stick securely to the club shaft and offer you the best performance on the greens.
Pro Tip: For added comfort, try and install the Super Stroke putter grip when you don’t plan on golfing for a few days. That way, it’s got plenty of time to dry and set without interfering with your game. Wrap your putter with the Super Stroke grip like a secretive ninja, as even the Grim Reaper couldn’t help but sink a hole-in-one with this amazing grip!
Conclusion
Super Stroke putter grips are great for golfers wanting to improve their putting. They’re big and have advanced grip tech, making them more stable and giving more control. Installing one is easy and only takes a few minutes with the right tools and instructions.
To start, remove the old grip from the putter. Cut it away carefully with a utility knife or grip cutter, without damaging the shaft. Then, clean the shaft with rubbing alcohol for a good surface for the new grip.
Next, cover the whole length of the shaft with double-sided tape. It’ll give more adhesion and stop the grip from slipping when used.
Now, align the hole in the base of the grip with the end of the shaft. Slide the grip onto the shaft, centring it properly. Put gentle pressure on it until it’s flush against the existing stopper at the end of the shaft.
Finally, slightly inflate the grip using an air compressor or compressed air canister. This will activate the rubber compound and make sure it sticks firmly to the shaft. Check the alignment one more time to make sure the grip is not misaligned. It’s now ready for action!
Frequently Asked Questions
1. How do I choose the right size of a Super Stroke putter grip?
Choosing the right size of a Super Stroke putter grip depends on your hand size and personal preference. Measure the distance from the wrist crease to the tip of your middle finger. If it falls between 7 and 8.5 inches, a standard size grip should work. For measurements below 7 inches, a undersize grip may be suitable. If your measurement is above 8.5 inches, an oversized grip might be the best choice.
2. What tools do I need to install a Super Stroke putter grip?
The tools required for installing a Super Stroke putter grip are grip tape, a solvent, a gripping station (a vice or clamp), and a hook blade or utility knife for cutting the grip tape.
3. How do I remove the old putter grip?
To remove the old putter grip, use a hook blade or utility knife to carefully cut it off. Start from the top and cut along the grip until you can peel it away. Be cautious not to damage the shaft while removing the grip.
4. How do I prepare the shaft before installing the new grip?
Clean the shaft with a cloth and grip solvent to remove any residue from the old grip. Make sure the shaft is dry before proceeding. Next, apply double-sided grip tape to the shaft. Start from the bottom and wrap it around, ensuring full coverage. Trim any excess tape with a knife.
5. How do I install the Super Stroke putter grip?
Pour a small amount of grip solvent inside the new grip and swirl it around to coat the interior. Pour out any excess solvent. Align the grip’s flat side with the putter face and push it onto the shaft, making sure it goes on straight. Use twisting motions while applying pressure to fit the grip securely. Allow some time for the grip to dry and set.
6. Can I install a Super Stroke putter grip myself?
Yes, you can install a Super Stroke putter grip yourself if you have the necessary tools and follow the correct procedure. However, if you are unsure or uncomfortable with the installation process, it is recommended to seek assistance from a professional club fitter or golf shop.
Liam Drake, an avid golfer and seasoned outdoor enthusiast, brings his passion for the greens to his golfing blog. With years of experience swinging clubs and exploring courses around the world, Liam shares his insights, tips, and personal stories to inspire and guide fellow golf lovers. Whether it's breaking down the latest gear, navigating challenging courses, or just sharing a memorable round, Liam's blog is a treasure trove for anyone who shares his love for the game.
Address: 1 S Grove St, 43081, OH, USA